What is Layer 2 of The OSI Model: Data Link Layer?

Layer 2 of The OSI Model: Data Link Layer provides the functional and procedural means to transfer data between network entities and to detect and possibly correct errors that may occur in the physical layer. Originally, this layer was intended for point-to-point and point-to-multipoint media, characteristic of wide area media in the telephone system. Local area network architecture, which included broadcast-capable multi-access media, was developed independently of the ISO work in IEEE Project 802. IEEE work assumed sub-layering and management functions not required for WAN use. In modern practice, only error detection, not flow control using sliding window, is present in data link protocols such as Point-to-Point Protocol (PPP), and, on local area networks, the IEEE 802.2 LLC layer is not used for most protocols on the Ethernet, and on other local area networks, its flow control and acknowledgment mechanisms are rarely used. Sliding window flow control and acknowledgment is used at the transport layer by protocols such as TCP, but is still used in niches where X.25 offers performance advantages. The ITU-T G.hn standard, which provides high-speed local area networking over existing wires (power lines, phone lines, and coaxial cables), includes a complete data link layer which provides both error correction and flow control by means of a selective repeat sliding window protocol. Both WAN and LAN service arrange bits from the physical layer into logical sequences called frames. Not all physical layer bits necessarily go into frames, as some of these bits are purely intended for physical layer functions. For example, every fifth bit of the FDDI bit stream is not used by the layer.

FROM THE INFOBLOX COMMUNITY

• Still Using DHCP On Your Routers? You Can’t Do That With IPv6
• How Docker Networking Works and the Importance of IPAM Functionality
• Don’t Forget One Critical Piece When Modernizing Service Providers’ NFV and SDN Architecture